Modular License Plate Frame - 4-Piece Design for Printing on Any Bed Size
Description
Print Details - All pieces were designed to be printed on a Creality Ender 3 Pro or larger. (Minimum Bed Size: 220 x 220 x 250mm / 8.6 x 8.6 x 9.8 inches) - "PIZZA MAN" lettering is totally optional and printed separately. Any lettering can be glued on top of frame. Print Settings - Frame Pieces - 100% Infill (Because the frame is thin most slicing software will slice with 100% infill) - Supports: None - "PIZZA MAN" lettering - 20% Infill (To get the lettering effect shown in photos, set top and bottom layers to zero in slicing software, then use 20% infill with Gyroid pattern) - Supports: None Assembly Tips - Pieces can be held together with license plate bolts only. If four screw are not available the frame can be glued together - If gluing, a good choice is [J-B ClearWeld Glue for Plastics](https://www.amazon.com/J-B-Weld-50112-Clear-0-85/dp/B009EU5ZM0/ref=sr_1_4?crid=2ZEAADBA5A4Y9&keywords=plastic%2Bglue%2BJ-B%2BWeld&qid=1703736909&s=automotive&sprefix=plastic%2Bglue%2Bj-b%2Bwel%2Cautomotive%2C309&sr=1-4&th=1) Support my Creations, [Buy Me A Coffee!](https://www.buymeacoffee.com/cwible)
Statistics
Likes
0
Downloads
0