Timemore Sculptor 064/064s Hopper Adapter
Description
This is an adaptor to allow any hopper with a 35mm diameter fitting to be put on the timemore sculptor. I designed it around fitting [this model by Jkim_makes](https://www.printables.com/model/105119-xeoleo-600n-single-dosing-hopper-and-bellows), but should also fit other hoppers intended for the XeoLeo style grinders, [like this aluminum one from AliExpress](https://aliexpress.us/item/2255800032148387.html). Hopefully the pictures are pretty self-explanatory. Print Settings: - Material: PETG - Walls: minimum of 4 - Infill: ~40% - Supports: If desired, in countersunk screw holes Tips: - Print the Inner Hopper Adaptor with the square end facing up - Print the Plate curved side up - Some tolerance was built-in to the area where the Inner Hopper Adapter fits into the plate, so to achieve a tight fit, which is required for correct grinder operation, wrap some kapton or other similar thin tape around it a few times to achieve a good friction fit. - Ensure that the finger guard thing, the thin metal piece with the “Y” shape on it, is placed with the thicker edge forward. There is a slope on the Inner Hopper Adapter which covers it to ensure no shards of beans end up on it.
Statistics
Likes
0
Downloads
0