Kickstand for Goal Zero Nomad 7 solar panel
Description
This Is A Small Part To Make A Kickstand For The Goal Zero Nomad 7 Solar Panel. The Kickstand Allows You To Change The Angle Of The Panel So That It Is Perpendicular To The Sunlight. This Makes The Panel Operate More Efficiently. The Part Here Is Just The Top Of The Kickstand. You Will Also Need A Short Piece Of 3/16 Inch Dowel Which You Can Get From Any Hardware Store For A Few Cents. The Kickstand Top Press-Fits Onto The Dowel To Form The Kickstand. The Notch In The Top Holds The Ties Located Around The Edge Of The Solar Panel So The Panel Doesn'T Slip Off The Stand. The Kickstand Is Short Enough To Just Fit, Diagonally, In The Storage Pocket On The Back Of The Panel. See The "Action Shots" For An Example Of How To Use The Kickstand. I Included The Openscad Source File In Case You Wanted To Modify The Part For A Different Dowel Or Change Any Of The Parameters.
Statistics
Likes
6
Downloads
0