Freak Barrel Front
Description
Since this is a remix (thanks BMC!) I couldn't get the print to be exact printing as sliced. I had to downsize both the X and Y axis to 99% because the threads fit too tight. I would recommend doing the same on your first print. Printed in PETG, on a raft, at .2 resolution. 99% X and Y Post printing clean up required. I used a drill with a pencil in the chuck covered in steel wool. Files included are a tip to make an overall 10" barrel, a 12" barrel, and a second porting design on a 12" barrel
Statistics
Likes
0
Downloads
0