Galilei Extruder , Tap-like CR10 / V6 Hotend
Description
Hotend with - Extruder based on Galileo (Orbiter 1.5 Gears + HW) - up to 20mm Motor (Nema 14 36mm) - CR10 Heatsink (the ones with ECAS) - PC4-M10 for Extruder - 40mm Fan - Single 5015, borrowed from EVA3 - 2 ducts (1mm ofset in Z, depending on Nozzle (accuracy of prints/magnet installation) - V6 Heatblock/nozzle or MK8 - MGN9H 50mm (nozzle as Z-probe) - Voron Tap Optical z-sensor - 4 6x3 N52 Magnets - Beltpath Cartesian above the rail Bowden must be a little bit shorter to reduce pressure force Remixed from a lot of sources: https://github.com/jon-harper/E34M1 https://www.printables.com/de/model/230690-eva-3-inlet-for-5015-fan-parallel-to-backplate/files https://github.com/EVA-3D/eva-main https://github.com/VoronDesign/Voron-Tap https://github.com/VzBoT3D/Vz-HextrudORT/ https://www.printables.com/de/model/396650-e3d-v6-and-revosix-hotend-mount-hex-nut-version https://www.printables.com/de/model/200939-eva-3-modular-3d-printer-carriage-platform
Statistics
Likes
0
Downloads
1