Amiga 1200 Pistorm32Lite Fan
Description
This is my take on a Cooling solution for Pistorm32Lite for Amiga 1200. I wanted to do something different so you do not need to desolder USB/Ethernet from the PI and fit a fan behind in the lid. I also wanted the airflow to come from outside the case. You will need a 5v 30x10mm cooling fan - typically the one that comes in coolant kits for Raspberry 3/4 or found here https://shorturl.at/gyzE1 You also need some tiny wood screws for the assembly. I used 2,5x8mm. For installation i recommend to assemble the whole setup before mounting into the Amiga. There is a lip on the bottom part that needs to be put under the mainboard PCB and then a screw on the right side. You might want to temporary remove the floppy cable so you get some room while mounting. I have a 1200 mainboard revision 2b, so pay attention if this fits your 1200. The bottom has two options: #1a - Bottom: The one pictured and tested working. #1b - Bottom: One that has a buldge to make room for the RaspBerry 4 Micro HDMI inner cable. I have not tested it. If you have feedback head over to DisCord and try to get hold of .Btty on https://discordapp.com/channels/784428461330530305/1082578009468457002
Statistics
Likes
0
Downloads
0