Elgato Stream Deck MK2 Mount (8020 T slot profile)
Description
With the housing you can mount the Stream Deck MK2 very easily, flexibly and comfortably on your Sim-Rig. The model consists of six parts. Please note that four M3 nuts are printed into the “Base Case” so that the frame can then be screwed to the base. So that you can insert the nuts during printing, you should define a pause in your slicer before the 3D printer closes the pocket for the nut. The holder is designed to be very flexible so that you can position the Stream Deck perfectly in your field of vision to avoid unnecessary head movements during the race. Have fun with it :) **Part list:** - 2x M6 Nut - 1x M6x20mm Hex Screw - 1x M6x25mm Hex Screw - 12x M3 Nut - 12x M3x10mm Full Thread Cap Head Screws - 2x M5x12 Lens-Head Screw - 2x M5 T-Nut for your aluminium profile
Statistics
Likes
0
Downloads
0