High Flow Fan Shroud for Printrbot Simple Metal
Description
This Fan Shroud Was Designed To Be: - Easy To Print At .3Mm. - Reliably And Quickly Rendered (No Odd Geometries) - Very Open For Air Flow. - Aimed At The Hot-End And The Print. - Not Damaged By Heat Or Bad Prints. General Repetier Settings: Layer Height: .3Mm General Print Speed: 70Mm/S Retraction Per Move: 2Mm Pla Temperature: 190Deg Extrusion Multiplier: 1.15
Statistics
Likes
36
Downloads
0