Guitar Neck Rest (for string replacement)
Description
## A guitar neck rest with optional soft material padding ### Models * Option 1: * Guitar neck stand with socket for a soft material interface with the guitar. A strip to fit into the mentioned socket above. Intended to be printed of soft material to protect the guitar neck. * Files: * GuitarNeckRest.3mf * GuitarNeckRest.stl * GuitarNeckRest_softStrip.stl * Option 2: * Guitar neck stand. * Files: * GuitarNeckRest_noSocket.3mf * GuitarNeckRest_noSocket.stl ### Dimensions * Option 1+2 * Base width: 75 mm * Base depth: 49.7 mm * Height: 98.5 mm * Neck rest width: 57.1 mm * Neck rest depth: 13.2 mm * Option 1 * Neck rest strip width: 49.7 mm * Neck rest strip depth: 13.2 mm * Neck rest strip height (thickness): 3 mm ### Print Instructions Nothing special, printed Guitar Neck Rest with PLA and Soft Strip from TPU, both 0.2mm with 15% infill. For the Soft Strip it is recommended to set a brim as the part touching the bed is quite thin. ### Suggestions for improvements are most welcomed!
Statistics
Likes
0
Downloads
1