Sewing Needle Holder (Singer)
Description
by Segasonicfan Designs https://segasonicfan.wixsite.com/retro @SegasonicfanDesigns on youtube: https://www.youtube.com/@SegasonicfanDesigns **If you use this model, please give at least a heart - it makes me happy!** *Designed for Singer sewing needles.* Should fit others I think. There are 3 parts here, and you can print them all together at once :) no supports needed. smooth flat PEI build plate if you want to match the look here. Note: the white image is a slightly older version, it has been improved in the pink (current) v1.1 *Make sure your printer is dimensionally accurate* - this helps alot. The thin cover (C) snaps onto the 4x nubs of the main holder piece (A). Then you can melt the nubs if you like for a more permanent assembly (squish them with a soldering iron). Make sure the holes are aligned when you press (C) onto (A). Its a snug fit. (B) is the cover top, which snuggly fits into place to keep the needles from falling out :) PLA settings used for my Ender 3 S1 Pro: Temp: 205mm/s / 65mm/s Speed: 50mm/s (initial layer: 30mm/s) Retract: 0.8mm / 50mm/s Infill: 20% Supports: No Skirt
Statistics
Likes
0
Downloads
1