BCAR for FDL-3
Description
Angle: 8 degrees (optimized for FLD-3 standard build) Recommended FPS range: 130 - 200 FPS Required: 12 x MF84ZZ 4x8x3mm Flanged Bearings 12 x M4x10mm Screws 12 x M4 Washers Compatibility: Work with both half and full length darts. Note: Extender is required when using full length darts. Use washers between the bearing and the 3D-printed part to minimize friction. Accuracy gain depends on your choice of dart and print quality.
Statistics
Likes
0
Downloads
1