Curvy Kaleidoscope Easter Egg
Description
A delightful Easter egg design that looks different from every angle. Rotate the two pieces and the patterns change. If you want it to print lighter and faster, you can use the settings I've provided in my PrusaSlicer 3MF files and MKS3+ GCODE. There, I've used layer height adjustments to vary infill and top/bottom thickness to reduce weight and improve print time. If you want to print eggs that fit inside each other like [Matryoshka dolls](https://en.wikipedia.org/wiki/Matryoshka_doll), I recommend scaling to 100%, 70%, and 50%. To print below 50%, you'll need to use a 0.25mm nozzle. Tightness of the pieces will vary based on a lot of factors, including scale. If you find the pieces are too tight, you could sand the rim of the bottom piece a little. If that doesn't work, consider reprinting with less flow, lower temperature, more elephant foot compensation, but first make sure you have the printer calibrated so the first layer prints well.
Statistics
Likes
1
Downloads
1