Sagemcom DIW7022 (2024 KPN decoder Set-Top box) wall mount
Description
A wall mount for the Sagemcom DIW7022 set-top box, known as the current (2024) set-top box of a Dutch internet/tv provider knowing: KPN. Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The wall-side is made pretty beefy (18mm thick), but this fits my personal setup with the screws i had. I've added a slotted vent pattern, to give it some air. The set-top box should fit somewhat snuggly. The backside should give space to fit each connector, if that is not the case, let me know ASAP, then i will edit the model. (I did not print this version myself, i'm gonna re-use my older KPN decoder mount, which this is based on) Havn't printed this variant of the decoder wall-mount, but i've made sure it would fir according to physical size, So i'm re-using the photo of the original model, hence why the photo is blurry. Recommanded print settings: - 0.6mm nozzle - 4 perimeters (This makes the screw holes strong) - 3 top and 3 bottom solid layers - 20% gyroid infill - 0.32mm or 0.40mm layer height (since this is a structural design, no need to make it nice) - Supports OFF - Every other setting is the stock Prusament PETG setting in 0.6mm nozzle config Printing orientation: standing up on the backside. (with the side where the connecters would go to the printbed)
Statistics
Likes
0
Downloads
0