Clay Screw Linear RAM Extruder
Description
This Clay Linear RAM designed, the design was tested however you need to find the proper bearings i did not measure so i post the proper bearings I used, the design fully 3d printed and fully functional Printing settings standard based on 20% infill except for some parts like core is 100 % Note : Nut needs to be fixed internally for the screw of 8 mm can fit and push the clay out of the pipe the design is used for 1.5inch pipe The design requires Nema 23 + Nema 23 Driver + Stepper motor signal Generator + Power supply
Statistics
Likes
0
Downloads
0