Power Wheels Jeep Go Pedal Plate
Description
This is a pedal mounting plate for a 1990s Power Wheels Jeep (One that formally used dual 6V batteries). The plate is 128mm x 108mm, 6mm thick, with a locating tab and locking anchor. The center holes are for mounting the load resistor Originally, these came with a 12x27mm SPDT switch that the pedal presses. - One plate can replace the original 12mm switch - Another can take a more widely available DPDT switch (from a cheap ride-on pedal) - The third can accept TWO 22mm switches, but you'll have to BYOP - A fourth is a blank plate you can cut/glue/edit, etc. Enjoy!
Statistics
Likes
0
Downloads
0