Robotic platform for multiple configuration
Description
Hi Maker ! With The Desire To Create A Robot Thanks To Electronic Solutions Like Arduino And Raspberry Pi I Needed A Solution To Test The Code . The Commercial Solutions Do Not Appear To Me Suitable To My Needs I Have Decided To Design My Own . So This Platform Has Emerged. I Share With You , If You Encounter The Same Problem May Be That It Will Be Able To Help You. This Is For Easily And Quickly Mounting A Robot With 2, 4 Or 6 Wheel Drive Or Why Not Legs. It Measures 35 Cm Long And 25 Cm Wide And 6 Cm High. There Is Enough Space To Contain A Arduino Mega Board With A Motor Shield . There Are : A Large Door For Easy Access The Interior . Holes For Fastening Standard Servo And Stepper Motor (Nema 12 Up To 17) On Top And Bottom To Move Sensor , Arms, Camera Or What You Want . Slots For Mounting Sensors On The Top And Bottom To Avoid Obstacle. Holes For Fastening Dc Motor And Stepper Motor (Nema12 Up To 17) On The Sides . 09/20/2015 Adding Mounting Holes For Lcd 16X02 And Nuts Cage For Door . The Plan Is Intended For Materials 3 Mm Thick . Here Is A Video That Shows Some Possible Configuration. Https://Www.Youtube.Com/Watch?V=4M6Jizvhn2W Here Are 3D Printed Parts For Sensors: Http://Www.Thingiverse.Com/Thing:1233546 Http://Www.Thingiverse.Com/Thing:938918 This Proto Was Made At Nybi Http://Nybi.Cc/ If You Make It, Thank You To Let Me Know Your Opinion.
Statistics
Likes
81
Downloads
0