Sanji 2d
Description
This model was inspired by the lack of Sanji memorabilia on Thingiverse and a Zoro model made by Nikunj_gohil. I have provided 2 models, one with a cigarette in Sanji's right hand and one without. The smoke made some slicing issues in my slicer so I thought I should make one without. For some reason, these models work better in the Creality slicer (probably because of a setting I haven't activated in Prusa). I got the no smoke sanji model to work in the Prusa slicer by doing the following: Print settings<layers and Perimeters<Quality Detect thin walls off This applies to people with 0.4 size nozzle Printer Settings<Advanced<Extrusion width perimeters: 0.45 external perimeters: 0.42 infill: 0.45 Solid Infill: 0.42 all the rest can stay at 0 I have designed the model to work best to the right of Zoro as the hills match. I have also upscaled the model to match the 2x minimum that Nikunj_gohil requires in his Zoro Model. In the future, I might make a Luffy model that can fit in between both these models the create The Monster Trio. This is my first attempt at creating a 3d model for 3d printing using Blender. I know it could probably be more optimised for 3d printing but obviously, that comes with experience. thanks:)
Statistics
Likes
0
Downloads
2