Another clamp for the Rokinon 135mm
Description
Made yet another clamp for the Rokinon 135mm. This one goes on the barrel of the lens (where the numbers are), but allowing the aperture ring to be manipulated. This is not very rigid (I printed in PETG) but works fine on 120s exposures. I suggest aligning the painting on the lens with the gap of the clamp. Instructions: 1. Print all parts. 0.3mm with 0.4mm nozzle worked fine for me. 2. Make M4 threads on one of the hinges (only possible in one of them). Alternatively, open the hole and use nuts to fix the screws. 3. Put all parts together. 4. Use a GoPro screw and nut to close the clamp. If you need more stifness overall, use in conjunction with this one: https://www.thingiverse.com/thing:6056701/ More useful links: Focuser: https://www.thingiverse.com/thing:5600585 Focuser adapter: https://www.thingiverse.com/thing:5140885
Statistics
Likes
1
Downloads
0