Beidou Power Pad replacement bumpers
Description
These are the inlaid outer bumpers for the Beidou power pads (they ship with the Leaperkim/Veteran Lynx electric unicycle). You will need to pry and possibly cut the silicone bumpers out of the pads. These should stick with a little bit of superglue. A nice rubber PLA with a low infill (10-20%) makes them have a similar squishyness as the original bumpers, but higher infill is fine too. No supports or special print settings are needed. Don't forget to mirror the set to print the opposite sides.
Statistics
Likes
0
Downloads
0