Cylindrical container shelves (stackable)
Description
Note: Partial work in progress, it works but might need future refinement. Organize your festive goodies! (Sometimes the snack you want is at the bottom of the stack. Three different container diameter size, 100mm, 110mm and 120mm. Bigger diameter should work on smaller diameter containers. -Stackable concept, I have not tried more than 2 levels. Proceed with caution. -Currently height per level is around 200mm apart, let me know if there is a preference for other heights. I have included two different ways to print the stands, if you want to print it flat or standing. I printed flat and had to insert a piece of paper into the gap to make it less wobbly. As everyone's printer will be slightly different, you might need to adjust the size in the slicer to achieve a good fit. ***** Want to buy me a coffee? https://www.buymeacoffee.com/zer0s Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you) AliExpress affiliate link: https://s.click.aliexpress.com/e/_DDKmhAd ***** Consolidated affiliate links of other 3D printing-related items: https://wp.me/peMLu6-j For Amazon affiliate links https://wp.me/peMLu6-2C
Statistics
Likes
0
Downloads
0