Sherpa Extruder Mount Sunlu S8
Description
I designed this for my Sunlu S8 to fit on the stock hotend carriage But it may fit other printers as well. The mounting bolt holes are 48mm apart so check your plate if your using it for something else and please let me know what you fit it on so i can add that to the list of compatible printers. You will not need any additional hardware because i designed it with the factory bolts, wheels, and spacers in mind. So you can reuse all factory hardware. I suggest PETG or stronger filament, but you could use PLA if you want. I used 9 walls, 9 top and bottom layers and 65% infill. Here is the link for the extruder. NOTICE !!!!!! I ONLY DESIGHNED THE 3D PRINTABLE MOUNT NOT THE ACUAL EXTRUDER!!!! Just found this amazing item on AliExpress. Check it out! $10.79 62%OFF | For CR10 CR 10S Ender3 V2 VORON HGX LITE Extruder Dual Gear Extruder Hard Steel Reduction Gear High Speed Motor 3D Printer Parts https://a.aliexpress.com/_mL7Vcvs
Statistics
Likes
0
Downloads
0