Kobra Neo/Go X-Axis Belt Tensioner
Description
Broke a tensioner assembely, so designed and printed this. Is a tight fit but that is best for aligment needs. I Printed at .16 Layer height, .3 first layer, 50% Infill Gyroid, 150mm/s, and with what ever PLA I had loaded. You will need a 3mm cap screw and washer(Or button head+washer) or any 3mm with a washer you have on hand to make this work. I used a M3x20 Cap screw with a washer.
Statistics
Likes
0
Downloads
1