Sirians 3-inch FPV Frame Accesories & Mounts

Sirians 3-inch FPV Frame Accesories & Mounts

Description

This is my accessories and mounting parts for my micro 3-inch FPV frame called Sirians 3. It is a generic 3-inch frame and may goes with other names on other parts of the world. Please note that I'm now using a 20mm height stand-offs for the frame to make it a bit more compact. The height goes uniform across all mounts on this design. Also, no Action Cam mount on this design, because i don't intend to use any action cam on such mini frame, only for bashing around. 1. FPV Camera Mount It is a remix from DanRichmond's design, scaled and redesigned to fit 16x16 Nano FPV cam. It consists of 2 parts, left and right, both are mirrored to eachother. 2. Landing Gear Just a generic landing gear to fit the motor mount. I believe i sourced it from a design here on Thingiverse, but so sorry I failed to trace it back to where i found it. Credit goes to the original designer. Print 4 pcs, each for each arm. 3. VTX Mount Basically, just a 20x20mm to 16x16mm adapter since I'm using a 16mm form factor VTX, only divided into 2 parts so that cables can be routed between the gaps to keep it tidy. 4. RX Mount Again, just a regular 16x16mm plate that you can stack above the VTX Mount to stick your micro receiver to it. I did this simply to avoid the heat generated by the VTX to directly affect the receiver by giving it some (minor) distance. Use spacers/gummy to set the distance as you required. 5. Rear Plate/Stand-off This part gets a little busy. It accommodates a XT30 mount, a TBS Crossfire Immortal T antenna, and a VTX antenna. The VTX Antenna I'm using is the Flywoo Atomic Antenna, so you may need to re-adjust the mounting holes to fit yours. This part still needs a 20mm metal stand-off to be attached into the frame. I'm using a 20mm M2 knurled type stand-offs. It can be modified to fit a mini GPS Module, but since I'm not using one so I don't design one. Note that you can also attach part no. 4 (RX Mount) on upper section of this part to give it more clearance from your VTX.

Statistics

Likes

0

Downloads

0

Category

R/C Vehicles