Anti-vibration mount for HyperX Quadcast Microphone
Description
This is a replacement for the anti-vibration mount for a HyperX Quadcast microphone. There is a front and back ring that can be used without screws or with the screws that the original mount used. There are self tapping screws used in the ring and machine screws (M2.5 x 0.45 I think) that go into the aluminum mount part. I used the self tapping screws to mount the two rings to the single point mount instead of the machine screws as two of the machine screws were already missing. I didn't really need the screws in the ring with the new design. I had to break the existing mount the get the elastic cord out of the holes. I used PLA and pretty standard printing settings, the two rings don't really need support.
Statistics
Likes
0
Downloads
0