Nerf Retalicon Super Pump Kit
Description
Super pump kit for Nerf Retaliator and Recon Should work with all other side prime or bolt blasters such as the tri strike Hardware Required 200mm x 20mm PVC pipe (27mm OD). x2 3mm Self Tapping screws x2 M4x6 Bolt x2 M4 Nut x2 Any aluminium bar ~12x3mm x 180mm or 1/2"x1/8" x 7.5" Glue Instructions Step 1. Insert the m4 nuts into the hole in the bolt carrier by heating them up with soldering iron and using them as heat set insert. Step 2. Drill 4mm holes in the aluminium bars that are 163mm apart Step 3. Use ur brain and figure out the rest. I use the shade grip and stealth sights
Statistics
Likes
0
Downloads
2