WDT Tool for 0.4mm 3D Print Needles
Description
This WDT Tool holds 5 0.4mm Nozzle Cleaning needles for 3D Printers and prints in 30 minutes. I don't have the model# or brand unfortunately. I bought mine from MicroCenter. They have a 35mm long shank on them that is slid into the body and secured with superglue and sat vertical overnight. I ran the tips on a sharpening stone at a 90 degree angle to dull them. The needle itself measures at 1.5mm on the shank but the holes are cut at 2 mm to allow for expansion of the PLA when printing these small holes. GG
Statistics
Likes
0
Downloads
0