Teensy 4.0 MIDI Breakout board Enclosure
Description
This is a work in progress, not guaranteed to fit, so keep that in mind. I got a few Deftaudio Teensy MIDI "hubs" to re-route some of my MIDI devices, this case is for the 4.0 version which has 5ea I/O. I am including two separate "top" or "cover" designs, one has cutouts on the ends and includes separate end panels that can be removed. The other is a solid piece with the end panels included. I have not tested the solid one, as I printed the one with removable panels. The "Bottom_MkII" piece should be able to be printed without supports, but I have not tried it yet, I used the "Bottom" one instead. Holes will need to be drilled, and it will need to be screwed together. I used 2.5mm x 10mm screws on my unit. I also designed and am currently printing/tweaking an enclosure for the "MIDI Thru 1in -> 10out splitter" (that will be printable on an Ender 3 or similar size printer) and will post it once I have the design nailed down. I will at some point also be creating one for the "Teensy 3.2 MIDI Breakout board, 3in / 3out" so stay tuned.
Statistics
Likes
0
Downloads
0