Spacex Launchpad 39A - Work In Progress
Description
WORK IN PROGRESS This is a scale model of the launchpad used by SpaceX at the 39A Launch Complex. The strongback needs a bit of work to be printed, but __I assume that if you printed a full Falcon9 you’ll know how to finish it.__ The remaining elements, meaning all that is close to the ground have been printed once. As for now, there is nothing in place to link the strongback (white) to the remaining elements (darkgrey). Feel free to upload any remix to this design. The scale is around 1/72. My Falcon 9 + Crew Dragon is around 0.898 m and the real one is 65 m. The mechanism around the holdback is designed to use this set of hardware per subassembly: - 1x M3x16 hex socket cap head screw - 1x M3 nut. -1mm piano wire for the hinge. -1 magnet Ø10mm thk 2mm Good luck!
Statistics
Likes
0
Downloads
0