Astro Planter
Description
Model Astro-Planter - a planter in the shape of a half moon, with an astronaut on its edge. Designed in Nomad Sculpt. See making of: https://youtu.be/36o9r7srgc8 Print Settings Layer height: 0.28mm Infill: 15%, gyroid Supports on the Astronaut (Plate 1), no supports on the Moon and Plate (Plates 2-3) Print time (Bambu P1S): - Astronaut: 15h2m - Moon: 3h53m - Plate: 1h12m Total print time: 20h8m Filament AMS: 4 colors for Astronaut, 1 color for Moon/Plate Model: - Astronaut: 111.36g - Moon: 157.40g - Plate: 59.62g Flushed: - Astronaut: 183.84g - Moon: 0.01g - Plate: 0.01g Tower: - Astronaut: 32.89g - Moon: N/A - Plate: N/A Total: 545.12g Filaments used in the pictures: Bambu PLA Matte - Lemon Yellow Bambu PLA Basic - Ocean to Meadow Bambu PLA Basic - Jade White Bambu PLA Sparkle - Slate Gray Sparkle Assembly Once the 3 plates are printed, attach the Astronaut to the half-moon holes with a bit of glue, hold in place, and then place the half moon on the plate. Then add a plant or flower with some soil in the half moon, and you're done! Note The astronaut may be a bit heavy once it's attached to the moon, but don't worry, once you add some soil, the planter will become sturdy and balanced. Upon request I can upload a new profile with less infill on the astronaut and more infill on the moon, or you can adjust the infill yourself in the slicer.
Statistics
Likes
0
Downloads
0