Anti vibration feet
Description
Easy to print anti vibration feet for 3D-printers and other machines. These are made to fit outside/under the existing feet on the Artillery SideWinder X2. Should fit the X1 and Genius as well. And also probably a bunch of other printers. Print in TPU 3 walls ,3 top/bottom and 7% gyroid infill. If you use more infill you will loose some of the dampening effect. I had to go up to 250 degrees celcius before it printed ok without under-extrusion, but your filament and hot-end might be different. Be careful with high temperatures if you don't have an all metal hot-end. (because of toxic fumes from PTFE tubing) Happy printing!
Statistics
Likes
0
Downloads
0