SAWYER SQUEEZE DRIP CAP
Description
3D MODEL DESCRIPTION Print in place cap for your Sawyer Squeeze, avoid drips when stored away in your pack. For the unfiltered side of your sawyer squeeze water filter. Print in place swivel so the cap can turn freely and is secured to the filter so you don't lose it. Can use a length of 550 paracord, remove one internal core strand and tie it around the groove of the filter. Included .stl/.step/.3mf files Will attach my .3MF file, but pretty standard settings; FDM 15% infill 2 wall No supports needed Printed in PLA or PETG
Statistics
Likes
0
Downloads
1