Flipping Flipper Case
Description
Case holds FipperZero™, WiFi Devboard for Flipper Zero, has extra storage space for other accessories. REVISED TO BE ASSEMBLED USING M3 SCREWS. Print Settings Printer brand: Tronxy Printer: Tronxy XY-2 Pro/Pro 2E/XY3 SE Rafts: No Supports: Yes Resolution: 0.2 mm layer height Infill: 20 Filament brand: Ender pla Filament material: pla Notes: print temp= 210c print bed= 60c wall layer count= 5 printed with brim= 7mm width filament needed= 380 grams time printing= 40 (TIME VARIES ACROSS PLATFORMS) Will need light filing to smooth edges after printing. Wifi Dev board case used for this design comes from @fivesixzero https://www.printables.com/model/179910-case-for-flipper-zero-wi-fi-module-v1/files MODEL NOW ASSEMBLED USING M3 SCREWS!!! 4pcs M3X30MM, 3pcs M3X20MM, 2pcs M3X25MM Case holds the FlipperZero™ without silicone case, will update page asap with the flipper_zero_with_bumper file which will also have cutout to allow room for "The XXTender " by RabbitLabs™ when assembled. (update -the insert mentioned above has been uploaded.) NEW MODIFICATIONS HAVE BEEN MADE- AS OF 2/20/2024 ALL FILES ARE UP TO DATE LATEST REVISION INCLUDES SLIMING PROFILE ON LIPS FOR WIFI DEVBOARD AS WELL AS LOWERING PROTRUDING PROFILE ON BACKSIDE OF CASE. FLIPPER_SILICONE_INSERT HAS BEEN GIVEN A SPECIAL CUTOUT AT BASE TO ALLOW PLACEMENT OF A HIGHGAIN ANTENNA FOR STORAGE THE WIFI DEVBOARD INSERT - SUPPORT BEHIND DEVBOARD CASE HAS BEEN SLIMMED DOWN, AND SMALL PROTUSIONS TO AID IN RETENTION OF DEVBOARD. Custom Section Donate Any support much appreciated, any contributions will go towards supporting myself and other makers. https://paypal.me/officialvisual?country.x=US&locale.x=en_US
Statistics
Likes
0
Downloads
1