Rovyvon E8 Tail clip magnet attachment
Description
Tail clip for the Rovyvon E8 Angel Eyes to hold a magnet. I used an "11.4mm x 11,4mm x 4.7mm" magnet in this project. The measurements were made really tight for a better hold, so you will have to push the magnet in the model while still hot. If you want to use a smaller magnet, use hot glue or design an adapter part. The tail clip will fit just right in the flashlight. There is a pass-through hole in the widest part for you to put a pin to hold in place. The pin can be made of a cotton swab or you can print it yourself.
Statistics
Likes
0
Downloads
0