Onewheel Pint X Concave footpad
Description
This print barely fits my print bed 235x235mm. Make sure it fits your print bed I want to experiment with flexible filaments. And see if I can create a usable add on for the stock footpad. I wanted to test how it fills to use a soft footpad without compromising my board. This print will increase you footpad size by about one centimeter across all the perimeter and you will require to add a skateboard sandpaper. You will also require two extra screws about 5mm longer to hold it in place. And for comfort I added some pieces of double sided tape to make it stick better. This footpad will not interfere with the already bad foot detection of the Pint, but will actually improve it if you make sure to add the double sided tape. It is [not as good as the Gripples](https://www.thingiverse.com/thing:6461180), but it is definitely better than nothing. I still want to try a more aggressive tail and dividing this print in two pieces
Statistics
Likes
0
Downloads
0