Short bolt on toe stop
Description
This is made for hex bolt with 5/16" 13mm head, it should work for most roller skates that have bolt-on toe stops, but you will probably need a shorter one than what your skate came with. Measure your length. Any bolt with a head of 13mm diameter should work, it's just easier to use a hex one because you will not need to screw it in with tools, just by hand. I bought mine hex bolt from a hardware store, it's 5/6" 18(UNC) and it's 7/8"(22mm). Also I would recommend TPU for the plug, I printed it with TPU 82A with 100% walls instead of 100% infill to ensure it's 100% solid so the hardness would stay 82A. I do not plan to use this design for stopping, just for stepping on them and maybe tricks. Although it's grippy enough inside on my laminate flooring, I can't guarantee that it will be good on any surface, so use at your own risk. * If you find yourself a nut fitting the bolt I guess you could turn it into an adjustable one, just use a longer bolt then. But mind that this bolt is much thinner than the one used in adjustable plates, so it may not be safe to use it that way.
Statistics
Likes
0
Downloads
0