Cable grommet (for 38mm Crown drill)
Description
Heres an easy to print and install grommet! You need 4 wood screws with a thread diameter of max. 4mm and a 38mm Crown drill. How to install: 1. Drill a hole with a diameter of 38mm. 2. Fix the "Bottom" on the bottom of the Table with 2 Screws 3.Fix the "Top" on the Top of the Table witch 2 Screws ATTENTION: Don´t choose the same location for the Top and Bottom screws! Turn it 90 Degrees.
Statistics
Likes
0
Downloads
0