ENDER 3 V3 KE ptfe/bowden tube mount with filamant run out snesor
Description
IMPORTANT INFO BELLOW Alright this is for the ender 3 v3 ke or ender 3 v3 se. I mad this to remove the spool on top of the printer this drastically reduces a lot of vibrations of the z axis gantry when printing at high speeds. there is a lot of solution's out there but none that have the filament run out senor built in i designed this to use the original screws that mount the sensor to the stock mount and the original screws that mount the spool arm to the frame. I would recommend getting the ender 3 pneumatic connector link in the description but its completely optional i made a 3d printable version for temporary use or permanent use. The link i provided also comes with ptfe tubing the connectors and a tool to cut it to whatever length you need. I would recommend buying a m3x15mm screw to bolt the two parts together link down bellow. this is also optional you can glue it together as well if you decide to glue it however THIS IS VERY IMPORTANT PLEASE PUT THE ORIGANAL SPOOL ARM MOUNTING BOLTS IN THE MAIN FRAM MOUNT FIRST. I have designed it to have hole to access the screws to be easily accessible with a bonus of not having to take it apart to remove it and making it impossible to loose screw when assembled the screws. link to m3x15 screw https://www.amazon.com/dp/B002QJF0XU?starsLeft=1&ref_=cm_sw_r_apann_dp_8V7WCXB9G8YDFWSYPBXS&fbclid=IwAR3WNKW4lF4A8Iym0Gmyk73HLvtZYUQu9ZK7wh2IjBhakiJ9WSuflp4KlJE_aem_AWpBMPF09oRtQecpPU24zxuDYcc2DGG4Mlka6QGbK5UaT7x-BEE0-ICuTk1kCisL7Bs link to the pneumatic connector and ptfe tubing and cutting tool https://www.amazon.com/dp/B086YPDHMF?starsLeft=1&ref_=cm_sw_r_apann_dp_2PPK57H6RYQXJDY3RRR0&fbclid=IwAR1rgb84_-B66xm_C-LnsL0OTLJOH75kZed0PIMnZCYQejDkNzPsD7M1oSw_aem_AWpo8wBsI7jJPaVDUGDWtZfXhCzR-73rhf1B7RMbrvJz04TR3xk6ZCE-RbPrZFv9sgw
Statistics
Likes
0
Downloads
0