HOTEND MOUNT for Airwolf HD2x... Convert to E3D v6 + Volcano
Description
Step By Step Instructions Here: Http://Www.Soliforum.Com/Topic/12034/Upgrading-Your-Airwolf-Hdx-Hd2X-Hotend-To-E3D-V6-Volcano/ The Original Hotend For The Airwolf Hd2X Is Underpowed And You Can'T Control Each Nozzle Temperature Separately. With This Mount, You Can Modify Your Airwolf Hd2X To Use E3D'S V6 + Volcano Hotend. With The V6'S Versatility And The Volcano'S Greater Throughput, This Makes An Excellent Upgrade For Your Printer. This Process Involves Modifying Your Firmware. Proceed At Your Own Risk. You Will Need: (2X) M3X20 Socket Head Cap Screw (2X) M3X45 Socket Head Cap Screw (4X) M3 Hex Nut (4X) Small Zip Ties (2X) E3D V6 + Volcano Hotends If You Plan To Print At Temperatures Over 290C, You Will Need The Following: (2X) E3D Thermocouple (2X) E3D Thermocouple Board Instructions: -Print At 70% Or Greater Infill -Best Results If Printed In Polycarbonate -Support Will Be Needed, But Make Sure Your Printer Doesn'T Put Support In The Zip Tie Holes -After Mounting Extruder, Place Endstop_Support.Stl On The Y Axis Rod For The Front Endstop. This Keeps The E3Dv6'S Fans From Hitting The Belt. Revision 3
Statistics
Likes
27
Downloads
0