Ubiquiti Unifi UCG-Ultra simple wallmount
Description
This model is a tight-ish fit, if you want it to have a tiny bit of play on the device, you might want to increase the size by a few percent. printing oriantation: standing up on the backside (with the lips). Recommanded print settings: - 0.6mm+ nozzle. - 3 or 4 perimeters. - 3 top and 3 bottom solid layers. - 15% or more gyroid infill (15% will be sufficiant). - 0.40mm or 0.55mm since this is a structural part, no need to make it nice. - Supports: Optional if you want the screwholes neatly round. - Every other setting is the stock Prusament PETG setting in 0.6/0.8mm nozzle config.
Statistics
Likes
0
Downloads
0