MJX Bugs 6 B6 B8 Upgrade Kit
Description
This kit allows you to mount modern (as of 2024) components on the MJX Bugs 6 or Bugs 8 frame, without any modification of the frame. * AIO Flight Controller (25mm x 25mm) * Nano RX (eg. TBS Crossfire Nano) * Nano VTX (eg. TBS Fusion Nano) * FPV antenna * 12mm-mount brushless motor * 19mm FPV camera (eg. Caddx Ratel 2, Caddx Nebula Pro) * Individual WS2812b LEDs mounted on max 9.5mm dia. round PCB * Custom LiPo battery Apart from the Battery case, all parts can be printed as-is. Recommended printing materials are included in each file name. I used Eryone TPU 95A and Eryone PLA+. The provided "Battery case" STL file is made specifically for the GepRC 660mAh 4S LiHV battery. If you happen to have this battery, all you need to do is add a few thin (~5mm) strips of 2mm thick adhesive foam on the inside for padding. For all other batteries, (smaller than 80mm x 38mm x 18mm) use the STEP file "Battery case solid", and carve out the necessary size. Make sure to leave ~1mm room for foam padding to avoid damaging your LiPos. For the Flight Controller, toothpick-style AIOs are recommended for the vertical USB port. To complete the motor adapter, you'll require M2 insert nuts 3mm tall and 3.5mm outer diameter.
Statistics
Likes
0
Downloads
0