Borderlands 2 Can Dice Roller
Description
A Borderlands 2 Theme Dice Can Roller. I saw some of these on Instagram a few months ago but didn't like the design. Unfortunately I couldn't buy the STL to make edits so I remade it myself to add the design I wanted. The biggest d20 I have tried with this has been 26mm wide at the widest point. The clearance between the ramps is ~32mm so it should fit dices up to that size. V1.1 27/02/2024 : Increased Can hole from 66.5mm to 67mm as can would fit but was very tight. Big dice would get stuck on the second ramp in the tower, so I increased the workplace height from 30mm to 37.5mm, and reduced the ramp length from 25mm to 17.5mm. I also decreased the height of the third ramp from 20mm to 15mm and decreased the length of the first ramp from 25mm to 20mm. Finally I added a lower ramp to the suspended first and second ramps so I wouldn't need to print the model with supports.
Statistics
Likes
0
Downloads
0