Vectrex UV Blacklight Frame 2.0
Description
An updated version of my Vectrex UV frame. Uses inexpensive UV LED tape lighting. Cable clips on top of frame are sized for 3.5mm OD cable and cable notch on bottom of frame is sized for 3mm cable such as found with this cord: https://www.amazon.com/dp/B09LCTB6LW Frame side ears are made to accommodate 3/4" (19mm) felt pads available inexpensively from most hardware stores. Ears can be fine tuned with a heat gun to improve fit to your Vectrex. The design is intentionally left a little loose to allow for variations between systems and the use of appliques on your system. Use cyanoacrylate glue during assembly of the four retaining clips for stronger fitment.
Statistics
Likes
0
Downloads
0