OPTICAL FLOW & LIDAR SENSOR MTF-02 CASE
Description
1.This case is designed for the Mico Air MTF-02 OPTICAL FLOW & LIDAR SENSOR. Given that the sensor is typically mounted at the bottom of the fuselage, where collisions are more likely, this case effectively protects the sensor. 2.It features three mounting options: adhesive mounting, cross mounting, and X mounting. The design includes screw holes compatible with 20mm20mm, 35.5mm30.5mm, and 25.5mm*25.5mm mounting hole positions, accommodating the majority of frame mounting locations without the need for drilling or any modifications. 3.The sensor wiring can exit from the side or vertically (directly into the fuselage, keeping wires concealed), allowing for flexible wiring depending on the actual setup. 4.If the sensor is mounted directly against the carbon fiber plate of the fuselage, please cover the sensor's back metal contacts with tape before installation (as shown in the diagrams). 5.The case can be printed with a variety of materials, such as PLA, PETG, ABS, etc. MTF-02 is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and is compatible with mainstream open source flight controllers such as Ardupilot, PX4 and INAV. It can be used directly after simple configuration without complicated development process. You can purchase it at this link https://robofusion.net/products/micoair-optical-flow-lidar-sensor-mtf-02-compatible-with-ardupilot-px4-inav
Statistics
Likes
0
Downloads
0