Nintendo Switch Wall Mount
Description
This remix adds another row of games and tilts them to make them easier to grab. Also added zip-tie anchor points for cable routing underneath. Finally, I included a screw hole alignment bracket to be used in-conjunction with a wall level to drill your mount holes, and may be discarded after the Switch holder is mounted to the wall. I wasn't confident the screw holes would hold up to any kind of abuse, so I added optional strengtheners. The vertical layer lines of the strengtheners should significantly increase durability compared to the horizontal layer lines of the main body. Only the main body is absolutely required. Add the arms for more snug retention of the Nintendo Switch cradle (print supports required). The strengtheners are extra insurance to reduce the risk of wall mount failure at the screw holes. If you choose to print the strengtheners, print the "Loose" versions first. If there is too much up/down play, print the "Tight" versions. Everything on this final version should be click-on (arms) or slide-on (Strengtheners). I haven't personally printed the full setup yet, so let me know if there are any issues. I offer no guarantees the wall mount won't fail and break your system, so use at your own risk.
Statistics
Likes
0
Downloads
0