Thrustmaster Joystick Tap Handle Adapter
Description
This is a simple adapter to joint a spare or sidelined Thrustmaster A-10/F-16/F-18 Joystick grip to a standard 3/8-16 beer tap handle. Prototypes were printed in PLA+, 0.2mm layer height, 6 walls, 25% infill and appear solid. Final product as showed is ABS with 0.08 mm layer height, 6 walls, 30% infill. The 3/8"-16 thread will fit off a well calibrated printer, but is tight. If you have one, running a 3/8"-16 tap will clean up the tread and make it smooth. The outer thread is M36-2.0mm and a bit of force on the first run cleans the thread up well and it works well following.
Statistics
Likes
0
Downloads
1