Printed 7 segment display with 0.3 mm screen
Description
A 3D-Printed Seven Segment Display With A Light-Transmissive 0.3Mm Pla Layer. Most Plas Are Transparent If You Use Only One Layer Of It, Thats The Main Feature Of This Display. Stl-File And Google Sketchup-File Available. Important: For The Light-Transmissive, Thin Layer Of Pla, You'Ll Get The Best Results If Your Printer Is Properly Adjusted And Your Fill Angle Is Tured To 0 Or 90 Degrees. 21 Pcs. Of 5Mm Diodes And 4/2 M5X25 Bolts Required.
Statistics
Likes
13
Downloads
0