STM Nucleo64 low profile mount
Description
Simple 4-tab mounting tray for Nucleo-64 family devices. The idea here was to allow a surface mounting and also cover up the bottom set of Morpho headers so they don't short out if handled while powered. I made this to carry a Nucleo F411re. Other 64 pin Nucleo family devices should fit too such as the F446re. Holes to attach the Nucleo are sized for #2 x 3/8" wood screws. Larger than this can result in interference between one of the bolt heads and the Arduino headers on the Nucleo.
Statistics
Likes
0
Downloads
0