Emek Stock
Description
This print gives you 6 options of stock length on a Planet Eclipse EMEK. Print the remixed extended BMC back cap and install it onto your emek bolt. Next decide on the stock length you want and print. Long stock is 220mm, short is 200mm. Add an M5 nut and 20mm length bolt. Print one or three anti-rotation bar lengths to set your length of pull. Stocks - Can print with supports, shouldn't be necessary. Bar - Normal supports required. Cap - No supports required. These parts could take some abuse, so make sure you have at least 4 walls and a decent amount of infill. This has yet to be field tested, so play hard at your own risk! Will not work on an Etha 3m. It *should* work on an Etha 2, but I dont have one to test. The last file is a buffer tube that *should* work with an EMC kit. I don't have an EMC kit or any way to test it. If you print it, please leave a comment if it works or not. You should be able to add a regular AR type stock to it.
Statistics
Likes
0
Downloads
0