Trx4m Snow Tracks
Description
Prints Per track (4 total): 8x small_wheel 2x large wheel 8x skate 1x inner_rail 1x outer_rail 3x stand_off 1x gear 1x removable_bearing_interface 1x outer_retainer 1x of the following depending on position inner_retainer_rear L inner_retainer_rear R inner_retainer_front L inner_retainer_front R 1x track out of TPU or flexible filament Hardware per track (4 total): 2x 10x15x4mm ball bearings 10x 2x6x3mm ball bearings 6x M2x12mm socket head 8x M2x8mm socket head 4x M2x10mm socket head Ill add files later for bearingless small wheels im not sure how well they would work, but that would greatly reduce the cost of these tracks. I used the same bearings that I had lying around from another set i printed which was the main driver for the bearing choice. Feedback is appreciated.
Statistics
Likes
0
Downloads
1