Hammer pendant
Description
This is a pendant, inspired by Odin´s hammer Mjölnir. The features are quite small so either a printer with high precision is required, or you just make it out of stainless steel like I did. For production I used a Spinner CNC with a cutter with inserts and partly manual movement, but you definetly can do that with a conventional mill. The material used is stainless steel (no idea what type precisely) from 30 mm round stock. After milling all edges were carefully deburred and sanded, since you don´t want sharp edges hanging around your neck. Material was sanded to 2000 grid, then polished with ceramic paste and a lot of time.
Statistics
Likes
0
Downloads
1